| Short descriptionThe DC UPS of the C-TEC series has inside of the housing ultracaps as energy storage. The buffer time depends on the output current and the energy of the ultracaps.
The C-TEC 2410 is characterized by the following properties: Maintenance-free due to durable ultracaps Micro-controller supported charging and discharging of the ultracaps Operation monitoring and charge status monitoring by LEDs Fast charging by active current charging control IPC management by time triggered and output current triggered shutdown function Numerous customer-specific parametrization settings by USB interface |
---|
Input | |||
Nominal input voltage* | 12 V DC / 24 V DC (SELV / PELV) | ||
Input voltage range in charge mode Nominal input voltage 12 V DC (decoupled / non-decoupled) Nominal input voltage 24 V DC (decoupled / non-decoupled) |
| ||
Nominal input current | 10 A @ (Ue = 24.0 V DC, Ua = 23.2 V DC, Ia = 9.9 A | ||
Inrush current | ≤ 35 A / 2 ms | ||
Charging current | Max. 7 A; active charging current control | ||
Nominal input power | 240 W | ||
Output | |||
Nominal output voltage | 12 V DC / 24 V DC | ||
Nominal output voltage in buffer mode (system voltage)** Nominal input voltage 12 V DC Nominal input voltage 24 V DC |
| ||
Nominal output current | 10 A | ||
Current limitation in discharge operation | 11.25 A ±0.75 A | ||
Limiting current monitoring in discharge operation | 10.3 A ±0,1 A after 1.5 s | ||
Energy capacity (typical) | NCPA0606G01 | 5,8 kJ (kWs) @ (Ua = 23.2 V DC, Ia = 2 A) | |
Efficiency | 95,1 % | ||
Internal consumption in buffer mode | 1.7 W | ||
Short-circuit resistance | Mains operation Buffer mode | Conditional short-circuit proof | |
Fuse | |||
Fuse output circuit | External | ||
General | |||
Protection class of the housing | IP20 | ||
Overvoltage category | II | ||
Pollution degree | 2 | ||
Dimensions (H x W x D) |
| 6.78 in x 4.55 in x 5.65 in (172 mm x 116 mm x 143 mm) | |
Weight |
| 3.97 lbs 1.8 kg) | |
Operating temperature / storage temperature Operating temperature UL tested | -40 °F(-40 °C)...140 °F (+60 °C) 50 °F (+10 °C)...140 °F (+60 °C) | ||
Relative humidity | ≤95 % non-condensing | ||
Max. height above sea level (without power reduction) | 6561.1 ft (2000 m) |
Description | Version | File Format |
210406 | ||
Manual | 210406 | |
EPLAN Macro | 140703 | edz |