CAPTEC 2410

Capacitor buffered Power Supply 

Type       :   CAPTEC 2410
Art.-No.  :   NCPA1905G01001

 

Short description

The DC-UPS of the series CAPTEC includes ultra-capacitors as energy storage inside the housing. This capacitor is charged with the system voltage during normal operation.

The connected loads are supplied as well from the system voltage. In case of an interruption of the system voltage the energy of the ultra-capacitors is released in a regulated way. With a dc/dc converter, the load is supplied by the capacitor until it is discharged. The back-up time depends on the state of charge of the capacitor and on the discharge current.

 

The DC-UPS has the following characteristics:

 

·           Maintenance-free because of long-life ultra-capacitors

·           Microcontroller based charging and discharging of the ultra-capacitors

·           Parameterizable via USB interface with the TECControl-Software

 

Control of operation and status of charge with LED’s and signal contacts

Technical Data

Input

Nominal input voltage

12 V DC / 24 V DC

Input voltage range

11,4 V DC - 27 V DC

Nominal input current

10,0 A

Max. inrush current

35 A / 2 ms

Energy1 @ Iout= 2 A

14 kJ ±4 %

Minimum charging voltage

System voltage + 0,2 V DC

Output

Output voltage in back-up operation (System voltage)
Nominal voltage 12 V

Nominal voltage 24 V

 

11,2 V DC ±4 %
23,0 V DC ±2 %

Nominal output current

10 A

Monitoring of limiting current

10,3 A ±0,1 A

Switch off if limiting current is exceeded

after 1,5 s

Current limitation (in back-up operation)

1,05...1,2 x IoutNom

Efficiency in mains operation (if capacitors are charged) @ Iout= 10 A

98 %

power loss in mains operation (if capacitors are charged) @ Iout= 10 A

5,4 W

Power loss in charge and discharge operation

20 W

Fuse

Fusing input

15 A (FK2) (device internal)

Fusing DC- output circuit

15 A (FK2) (device internal)

Fusing DC- output circuit

25 A (FK2) (device internal)

Overall

Type of connection input IN X1(1, 2)

Spring-clamp technique
max. 6,0 mm² (AWG 24-10)

Type of connection output OUT X1(3, 4, 5)

Type of connection messages SD X3(1, 2), IN OK X3(3, 4), REL X2(1, 2, 3)

Spring-clamp technique
max. 2,5 mm² (AWG 24-12)

Type of connection USB X4

USB-B socket

Protective system

IP20

Dimensions (H x W x D)

4.86 in x 6.5 in x 5.96 in
(124 mm x 165 mm x 151 mm)

Weight

2,0 kg

Storage temperature / environmental temperature

-40 °C...+60 °C

Humidity

95 % condensation not permissible

1 in new condition of the device at 25 °C ambient temperature 

Downloads

 

Description
Version
File Format

Datasheet

191108PDF
Manual191108PDF
3-D-Model191007STP

To download the manual and the 3-D-model please log in here