Battery buffered DC-UPS 

Type      : AKKUTEC 1208-0 USB
Art.-No. : NBPA0616G01006


Short Description

The battery buffered DC power supply of the series AKKUTEC is working according the stand-by parallel mode and ensures in connection with a lead-acid accumulator a safe continuous DC power supply in case of mains failure.
The back-up time is depending from the state of charge of the accumulator and of the discharge current.

The power supply has the following features:

  • Battery charger with I/U-charging characteristics
  • Battery management by micro-controller
  • Battery voltage tracking of the charging voltage by external sensor module (optional)
  • USB interface: with corresponding drivers and Schneider TECControl Software the message contacts can be controlled and a Shut-Down/Restart can be made.

Technical Data

Nominal input voltage115 ... 230 V AC
Input voltage range

98 - 264V

115V -15%

230V +15%

Nominal frequency47 ... 63 Hz
Nominal input current

1,4 A - 115 V AC

0,7 A - 230 V AC

Output voltage (without battery)13,4 V DC ±0,4%
Output voltage (with battery)9,9 V DC - 13,4 V DC
Final charging voltage (with temperature sensor)
13,5 V DC bei 25°C 
Final charging voltage (without temperature sensor)13,4 V DC ±0,4 %
Nominal output current7,5 A DC
Efficiency88,0 %
Battery type

Pb-Akku, maintenance-free

Pb- Akku maintenance-free (Option with changed characteristics)

Buffer timeDepending on battery and load
Degree of protectionIP 20

Operating temperature

Recommended for battery

0... 45°C

0... 25°C

Storage temperature0...50°C
Max. altitude (without derating)1000 a.s.l
Dimensions (H x W x D)160 mm x  75 mm x 150 mm
Weight ca. 1,0 kg

Snap-on mounting for DIN top hat rail

Norms and RegulationsEN 50178 / EN60950
For more details see datasheet.


File Format

To download the manual and 3D-Model please log in here