C-TEC 2410-1

Capacitor buffered Power Supply 

Type       :   C-TEC 2410-1
Art.-No.  :   NCPA0609G01002

 

Short description

The DC-UPS of the series C-TEC includes ultra-capacitors as energy storage inside the housing. This capacitor is charged with the system voltage (Ue) during normal operation. The connected loads are supplied as well from the system voltage. In case of an interruption of the system voltage the energy of the ultra-capacitors is released in a regulated way. With a dc/dc converter, the load is supplied by the capacitor until it is discharged. The back-up time depends on the state of charge of the capacitor and on the discharge current.

 

The DC-UPS has the following characteristics:

·           Maintenance-free because of long-life ultra-capacitors

·           Microcontroller based charging and discharging of the ultra-capacitors

·           Parameterizable via USB interface

·           Control of operation and status of charge with LED’s

Compatible with the TECControl-Software

Technical Data

Nominal input voltage

12V / 24V DC

 

Fusing input

15A (FK2) (device internal)

Input voltage range

12,2V - 27V DC

 

fusing
DC- output circuit

15A (FK2) (device internal)

Minimum charging votlage

x-001 (decoupled unit):

x-002 (not decoupled):

(see chapter “5 Operation“)

system voltage + 0,7V

system voltage + 0,2V

 

fusing
capacitor circuit

25A (FK2) (device internal)

Nominal input current

10,0 A

 

Type of connection input     ‘UE

Spring-clamb technique
max. 2,5mm²
(AWG 26-12)
torque N/A

max. inrush current

35A / 2ms

 

Type of connection output    ‘UA

Output voltage in back-up operation
system voltage 12V

System voltage 24V



11,7V DC ±4%
23,2V DC±2%

 

Type of conneciton messages  ‘I/O’

Spring-clamb technique
max. 1mm²
(AWG 28-14)
torque N/A

Nominal output current

10A DC

 

Type of connection USB

USB-B socket

Monitoring of limiting current

10,3A DC ±0,1A

 

Protective system

IP 20 a. EN 60529

Switch off if limiting current is exceeded

after 1,5 Sek.

 

weight  

1,3kg

Current limitation

1,05...1,2 x IANom

 

Storage temperature /
environmental temperature

-40...60°C

Efficiency

UA=23,2V DC, IA= IAnom

>90%

 

Humidity

< 95% condensation not permissible

max. power loss
‘worst-case’

20W

 

Dimensions

163 x 70 x 150mm
(H x W x D)

Downloads

Description
Version
File Format

Datasheet

171005PDF
Quickstart-PDF
Manual171005PDF
EPLAN Macro140703edz

To download the manual and the EPLAN Macro please log in here